Why do Honda steering wheels get smooshy after a few years?
Monday, February 8th, 2010 at
6:05 pm
You are currently browsing comments. If you would like to return to the full story, you can read the full entry here: “Why do Honda steering wheels get smooshy after a few years?”.
The factory steeling wheel degrades because of it’s chemical compound. UV rays and the natural oils on your skin cause it to break down over time. The "movement" you’re describing is caused by the rubber compound expanding and rotating around the metal core of the steering wheel.
The year of your vehicle makes it pretty simple to swap in an aftermarket steering wheel. It’s more difficult on newer vehicles with "features" built into the wheel.
You can find a compatible wheel on literally hundreds of sites on the internet, Ebay is also a great choice. You can obtain a fairly decent looking wheel for around $70 – $100 shipped.
Removal and installation is another story of course. If you’re not mechanically inclided I recommend you find a friend or local shop to do the swap for you. It’s a simple process of removing a primary bolt and then using a puller to get the wheel of it’s hub. In some cases the puller is not necessary, the wheel will come off with little hesitation.
Hope this helps! Good Luck!
there are some great steering wheel covers, you might want to consider that an option, i know wal-mart has them for like 10 or 20 dollars. Its worth a try!
Go with a after market wheel.
You can get a quick release style one, like in fast and furious for about 140.00 with all hardware and adapter.
Still have the horn too.
Replacing the steering wheel is the only solution adding a cover only changes the appearance not the integrity of the actual inner lining or firm grip feel. Try a salvage yard for a used one and give it a test grip to be sure that is feels right before you buy it.
it is because of cheap materials used in the construction of the car.. i would not pay $350 for the whole car